iowapaster.blogg.se - 4.4.1.2 packet tracer free download

Router R2 !R2 enable configure t ! interface GigabitEthernet0/0 no shut ! interface GigabitEthernet0/0.1 encapsulation dot1Q 99 native ip address 192.168.99.2 255.255.255.0 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 192.168.10.2 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 192.168.20.2 255.255.255.0 ! router rip version 2 network 192.168.1.0 network 192.168.10.0 network 192.168.20.0 network 192.168.99.0 passive-interface GigabitEthernet0/0.1 passive-interface GigabitEthernet0/0.10 passive-interface GigabitEthernet0/0.20 no auto-summary end copy run start Scripts Router R1 !R1 enable configure t interface GigabitEthernet0/0 no shut ! interface GigabitEthernet0/0.1 encapsulation dot1Q 99 native ip address 192.168.99.1 255.255.255.0 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 192.168.10.1 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 192.168.20.1 255.255.255.0 ! router rip version 2 network 192.168.1.0 network 192.168.10.0 network 192.168.20.0 network 192.168.99.0 passive-interface GigabitEthernet0/0.1 passive-interface GigabitEthernet0/0.10 passive-interface GigabitEthernet0/0.20 no auto-summary end copy run start All PCs should be able to ping the Web and other PCs.Configure spanning tree priorities according to the table below:.Configure per-VLAN rapid spanning tree mode for all switches.

Use the following table to configure the appropriate switch ports to form EtherChannels:.

All EtherChannels are statically configured to trunk all VLANs including VLAN 99 as the native VLAN.

All EtherChannels are configured as LACP.

F0/21 – F24 and G0/1 – 0/2 as the native trunk for VLAN 99.

Configure the following static ports for S3 and S4:.

F0/20 – F24 and G0/1 – 0/2 as the native trunk for VLAN 99.

Configure the following static ports for S1 and S2:.

Configure all other switches as VTP clients.

Disable RIP updates for each subinterface.

Do not advertise the network connected to the Internet.

Configure the IP address for the subinterface according to the Addressing Table.Ĭonfigure RIPv2 using the following requirements:.

Configure the appropriate dot1Q encapsulation.

On R1 and R2, enable and configure the subinterfaces with the following requirement: Click Check Results > Assessment Items to verify you have correctly configured all items. Because this activity is checking over 150 items, not all configurations are assigned a point value. Note: Packet Tracer does not allow assigning point values less than 1. You are responsible for configuring routers R1 and R2 and switches S1, S2, S3, and S4. The PCs and Internet devices are all preconfigured. You will configure inter-VLAN routing with RIPv2, VLANs with VTP, trunking, and EtherChannel with Rapid PVST+. You are responsible for configuring subinterfaces to communicate with the switches. In this activity, two routers are configured to communicate with each other. Topology 4.4.1.2 Packet Tracer – Skills Integration Challenge Addressing Table Device Packet Tracer – Skills Integration Challenge (Answer Version)Īnswer Note: Red font color or gray highlights indicate text that appears in the Answer copy only. Version 5.02Ĥ.2.1.3 Packet Tracer – Configuring EtherChannelĤ.2.2.3 Packet Tracer – Troubleshooting EtherChannelĤ.3.4.4 Packet Tracer – Troubleshoot HSRPĤ.4.1.2 Packet Tracer – Skills Integration Challenge After you review all questions, You should practice with our online test system by go to "Online Test" link below. Each version have 1 to 10 different questions or more. While you take online test with, You may get random questions from all version. We recommend you to go thought all version if you are not clear. What is your version? It depends on your instructor creating your class. The latest version is version 6.0 in 2018. From year to year, Cisco has updated many versions with difference questions.